Your email address will not be published.Required fields are marked*
Why dont you just lift your leg too to make it green all over?
This is the article that you need:How to Clean Brass.
I work at a lodge in Tanzania and we have big Moroccan lamps that needs cleaning. They are made with copper and I am looking for a quick, easy and safe way to clean them. They are too big to put in any kind of solution. If you could recommend something that I could rub on and then off again, leaving it clean, it would be very nice. Can I perhaps make something with ingredients from the kitchen? Would you be able to provide me with some kind of recipe? We also have several large copper bathtubs, red and yellow, that need a good cleaning. Could you please help?
If your copper items are antique, they are considered more valuable with the tarnish. To clean an antique copper piece and preserve the tarnish, use the methods in this article. Since the method is simply to wipe the item with a cloth dipped in soapy water (made with just a mild soap), it can work for any size item.
Source: The Natural Handyman Removing Mineral Deposits from Household Surfaces
Good day sir yes, (sighs) Im a Brit.
Clean It Fast, Clean It Right by Jeff Bredenberg
If the blue stains are mold, they will need to be removed with an antifungal or they will likely keep returning. White vinegar is an effective antifungal, and is safe to use on brass.
12 Store-Bought Natural Glass Cleaners Put to the Test
How to clean copper with tomato ketchupby Miss Thrifty
Just wiping the spots with the white vinegar should work, but if needed, you can boil the brass item in vinegar for a stronger cleaning. See the How to Remove Tarnish from Brass section of theHow to Clean Brassarticle for the steps for boiling the item in the vinegar.
He cleaned one of them with Comet and three other chemicals, and it looked like a white-ish color on the surface, so now he is applying stainsteel polisher.
To wash the piece, begin by mixing a small amount of mild soap with water in a small dish or bucket. Be sure that the soap does not contain any harsh chemicals, particularly chlorine bleach which could eat themetal.
I am painting an old set of dressers and want to keep the old brass hardware dark and old looking. Some of the washers have rust. Anyone know if Naval Jelly will remove the rust but leave the tarnished finish? Help appreciated!
I have a widows mite or Purta coin; its almost solid black. It has Alexander on one side, and I cant tell whats on the other. I was visiting a friend who lives in Vatican City, my friend gave me the coin and a letter from the Vatican that states its authenticity. Should I and what would be the best way to clean the coin? Its in a 24kt pendant with a pigeon blood ruby above it. I want to wear it on a chain; not sure if I should. Any help?
Hi, I have just purchased some antique copper cutlery that I would like to use. How should I keep them clean? Or should I just display them?
Moisten a softcloth, such as an old T-shirt or flannel, with a small amount of the soapy mixture and gently wipe away any remaining dirt and dust from the piece. Be sure not to rub too hard or you could scratch or damage the surface, particularly if there are any abrasiveparticles in the dirt or dust.
Steel wool with toothpaste and a little water (or a Brillo Pad) is the best thing to use when cleaning antique metal.
Everything is all original and the base, which sets up against the ceiling, has what I would call a hammered design to it and the metal is fairly thin. Then, it has a chain with the original cloth and copper wiring still laced among the links down through the wooden portion, which continues onto the three arms, and comes out horizontal from the base.
Does Murphys Oil Soap qualify as a mild soap? If not, then what? Ivory soap bar? I bought a lamp that turned out to be copper and its patina is quite nice. But dust and dirt has accumulated in the decorative areas, making the piece look shabby. Id like to clean it just enough to remove the dirt (without making the copper look dull).
If the piece is particularly dirty or dusty, first brush off the debris using a soft paintbrush.
How to Remove Glue from a Copper Pipe
I have a life-sized bronze of a Boxer dog that now has green streaks on the patina caused by my old dog Bailee (now deceased). In his declining years, he would lift his leg on my beloved bronze. What should I do? To clean or not to clean, thats my dilemma. This piece will never be sold by me, so value isnt in play here. Any thoughts or suggestions would be greatly appreciated.
Hello, I recently bought two guardian lions. My husband wants to get them clean and shiny, and he does not care about the price of them because he wants to keep them.
metals develop a certain look over time due to patina and oxidization. With arts and crafts metals, they often began as an antique look as opposed to a bright, shiny metal when they were originally created. It was the style in those times, to have pieces that were tarnished and old looking. As time has passed, the color may have changed slightly, such as getting darker, but it would be detrimental to the value to try to alter the color in any way. Below is a simple cleaning method to remove dust and dirt that will not damage the look of the piece and should not affect the value. It is not recommended that you put any special products on the piece as it could alter it and decrease the value. For preservation of old metal pieces, it is always best to consult with a professional who can look at the individual pieces to determine how they may react.
Never clean ancient coins with chemicals, or any other chemical cleaning products. The best way to clean them is mechanically with wooden sticks very well, even if it takes hours, then apply wax on them and keep then in a dry, closed box. If you can, add a small amount of silica gel in the box and keep monitoring the coins.
Filed Under:Cleaning GuidesMetalsTagged With:antiquebrasscoppermetal
How do I disinfect my brass ice bucket? I bought it secondhand and want to disinfect it before using it.
A simple cleaning with mild soap and water will remove the dirt and fingerprints without removing tarnish or patinas that have formed over time.
Do not apply any special coatings or cleaners to the piece without the recommendation from a professional who is experienced with antiques.
How to Remove Rust and Restore Metal
Ive just bought 17 small antique Indian bronze figures at auction. Unfortunately, the previous owner cleaned them and has ruined the patina, leaving a whitish residue in the many grooves of the statues. Ive tried using warm water, soap and a nail brush to remove the residue, but that didnt work. Then I tried putting a statue in boiling water and rubbing with the brush. A slight improvement, but not much. Any suggestions as to how to remove the horrid whitish stuff? And is there any way even if it takes many years to restore the patina? Thanks.
I have just bought a bronze ring 13th-15th c. Its not green or crusted, its just very dark, almost black. Is there any safe way I can brighten it up so its easier to see the lovely little star etched on the top?
What is missing from or wrong with this cleaning guide?
This iframe contains the logic required to handle Ajax powered Gravity Forms.
I have a set of 9 copper-relief decorative panels that form a frieze around the upper wall of a room. The panels date to 1885 when the house was built. Some of the panels have a pleasing dark oxidized patina, but 5 out of the 9 have suffered exposure to water in the past and have developed a whitish-green crusty oxidation on the surface that obscures the detail and detracts from the beauty of the panels. I would like to clean the affected panels, and possibly re-finish them to create a darkened patina similar to the remaining (undamaged) panels. Any suggestions?
If the dust and dirt isnt bothersome, its really best to leave the pieces completely alone.
I have two 3-4 foot solid brass vases. There are 2-3 small blue mold spots; when using my brass cleaner, they are not removed. Do you have any suggestions on how I can get these spots off?
I have an arts and crafts sideboard with deceptive copper hinges and drawer handles. Whats the best way to clean them? At the moment, they are lost, and Id like them to be seen.
How to Remove Oil Stains from Brass
If you would like a response from us, please leave your question in the comment area at the bottom of this page instead of here.
I find it stupid to keep a beautiful piece looking decrepit. I have a 400 year old Chinese bronze vase that I need to clean. I very much doubt that the original craftsman that made it would have wanted it looking faded and dirty and stained! He would have wanted it to look new, forever.
I have an older Stiffel lamp, not antique, but it is pitted. Can that be cleaned? How do I even the pits? I love this lamp! Its tall and heavy.
Very valuable, rare, or ancient antiques do lose value if you if they are restored or cleaned improperly. However, an expert needs to evaluate your item to see if it falls into one of those categories. Museums restore items all the time, and they dont lose their value because of it. It just needs to be done right. Also, vintage or common antiques do not necessarily lose value by being cleaned. I would much rather see an old chandelier that has been restored to its former glory, and would therefore pay more for it than one that is dark with tarnish. I am restoring a 1940s brass chandelier right now, and it is just gorgeous. It makes me sick to see so many people painting these.
Hello, I am just bought a beautiful brass Rhone Mastercraft table. More than an antique, it is a classic hollywood regency piece form the 60s or 70s. It has patina and some darker spots. Should I clean it to make it really shiny or that will diminish the value? It is really dull and Ive seen the same tables on the internet; they look like they have been polished. Thank you very much.
Ive read to use rubbing flour with oil to clean my copper incense burner (the kind you fill with ash to burn the incense flat on top of). I havent tried it yet, but figured Id throw that out for someone else to inspect. I do love treating my skin with flour & oil, so I imagine its good ?
I have one of two antique, hanging, wooden and bronze, three-arm, ceiling-directed lights with original wiring with me and the other is still hanging at my great-grandparents property that still remains in the family. I just happened to bring this one back home with me. The light bulbs screw into it at the top side of each of the three light bases and the body is either walnut or oak, not sure.
I just came into proud possession of some nearly 100 year old arts and crafts copper candlesticks and various copper and bronze bowls. Of course, I do NOT want to lose any of the original patina that has rendered over time, but the pieces are a bit dull and could, I feel, use appropriate cleaning and preservation. Is there a product(s) designed for non-destructive beautification of these old metal objects?
For copper cleaning, try using 1/2 white wine vinegar & 1/2 warm water; white wine vinegar is a natural anti-bacterial cleaning agent that has been used for hundreds of years before modern chemical mixtures. If you want to remove the patina and polish it up, use the same mixture with the addition of salt to act as an aggregate to help polish. Ive used this on copper drinking cups for years and it works great!
I have seen on a TV show from the U.K. women cleaning their bronze or gold plated item with, dare I say, ketchup? It looked great after. The dirt and dust was brushed off first, then the ketchup was brushed on and left briefly. They then wiped it off. It had something to do with the acid in the tomatoes and the coloring of the ketchup itself that made it safe to use. Im not sure if this is true or not and would like to know.
The farmhouse was originally built with natural gas lines running throughout the house and all natural gas lights. I was wondering if it was possible that these could have been converted from natural gas to total electric somewhere along the way. The metal on it appears to be bronze and after all these years, it appears that these lights have a coating of rust built up on the metal. I was wondering how to best clean this light? Thanks. Sorry for the length of this comment.:)
Mild detergent and a good scrubbing should clean the ice bucket well, but for a more thorough disinfection, use vinegar as described in the Removing Tarnish section.
Never touch antique bronze or copper without washing your hands first; the oils on your fingers can leave permanent stains.
Antiques will quickly lose their value if the original tarnish or patina is altered or removed. Avoid using any special cleaners other than a mild soap and water to ensure that they remain untouched.
I dont know if itll work, or the chemicals in the stainsteel will damage the metal. Would you have any comments about this procedure of getting the pieces clean and shiny?
How to Remove Oil Stains from Brass
If you want to keep the table for yourself, then its just a matter of personal preference. If you want to sell it, consider the price of the polished versions youve seen online versus the price you paid for this unpolished piece. However, an appraiser would know what it best for that specific piece. You may have just gotten lucky with your purchase price and bought it from someone who doesnt know better, or the people with polished pieces might not know better. Its always best to ask a professional.
Natural Liquid-Free Way to Clean Your Phone on the Go for Cheap
When the entire piece has been wiped down, gently rinse with clean water. If you live in an area with hard water, use distilled or filtered water for rinsing.
About 20 years ago, my sister had an old seemingly worthless, dented, beat-up, dull, floor-standing brass urn brought back to life. She had a small business polish & then dip it in some type of solution that permanently left a beautiful shiny brass gold color that never tarnished again! What process do you think they used; it wasnt extremely expensive? I have brass candlesticks that Id loved to stay bright & gold-like.
Thank you in advance for any advice you can give me.
It sounds like you want to remove the tarnish though. If so, this is the article that you need:How to Clean Copper. The method for removing tarnish in that article has several recipes made from kitchen items that can be used on any size item.
How to Remove Rust and Restore Metal
I have about 60 or so pieces of antique copper, some from ancient Persia (B.C.) and it really ticks me off when I find a piece that has been cleaned to the point of the patina being removed. As a serious collector, I wont pay very much for the piece that has been ruined by the person that cleaned it in ignorance. But I will still buy it to remove it from ignorant hands if they will sell it cheap enough. It takes many many years to get a good patina back, but it will never again get the true age look back once its been removed.
Yes, tomato sauce can be used to polish bronze, copper, gold, and silver! Here are two great articles that have photos documenting the results:
Cleaning can reduce the value by 90%!! But if you really dont care about turning a $5000 piece into a $500 one, thats your prerogative. Some pieces even that old were intended to have both shiny and patinad surfaces for effect. I suggest finding out first what the piece is worth before destroying possible value!
I have and have had an original J Cambos bronze 1819 with beautiful green patina for over 60 years. The smooth areas are reddish brown and have not turned, but are dull. Is there a way to brighten these areas up? I have seen an Auguste Moreau offered for sale for $220,000usd with a very, very dark reddish brown patina on the smooth areas (beautiful). Should I clean the smooth areas of my Cambos and treat them with olive oil to bring out a more shiny appearance? And/or should I try to duplicate the finish on the Moreau? I would appreciate any comments.
If you dont care about retaining the value that collectors appreciate and pay for, then go right ahead and clean the vase.
I bought an old adjustable table lamp that is solid brass, including a round perforated brass shade at a rummage. It looks as though its never been cleaned. I dont know what I should do to clean it or if I should sell it as is.
Dry immediately. Allowing water to set on the piece may affect the oxidation and leave marks.
It also has a switch at the bottom of the base that can still be turned, which can turn the light off and on. I am curious when this was made and the only thing that I can find on any of it is the name Leviton, which is a company that makes electrical items. The name was written down inside each of the three sockets where the lightbulbs are fitted. There used to be three white milk bowl shades, which slipped on over the outer part of the socket and the lightbulb would hold it in place, but that was many years ago I guess at various times they must have broke over the many, many years these had been hanging in the farmhouse.
How to Remove Glue from a Copper Pipe
However, blue-green stains on brass are more commonly from corrosion. If that is the case, it is possible that the white vinegar will also work to remove them.
Your dog has made an ancient work of art smell.
I found your comment while I was googling how to clean certain items. I have an item that I found, but dont know what it is. I would describe it as an ancient plate. I took it to 2 antique dealers & they dont know what it is. I also took it to an antique show & the appraiser there said hes never seen anything like it, but knows its B.C. & very valuable. He suggested that I contact the Chicago Museum of Art for guidance, but I didnt get anywhere talking to them. If you can help me identify what I have, Id appreciate it. Its been a year & Im getting no where.
How To Clean Your Jewelry With Ketchup, Plus More Bling-Brightening Hacksby The Huffington Post
Leave the stains to remind you that you are but a fool with a foul dog.